disconnect the car battery, if the car battery goes
flat, or if using Emergency Disarm from an armed
state. Remember to turn the siren back on.
Buy siren keys from www.avscarsecurity.com.
EMERGENCY DISARM
IMPORTANT.
Emergency disarm can be used to
disarm the alarm if the remotes are not working.
This is done using your alarm’s PIN being entered
via the ignition key.
1. Open the driver’s door. The siren will sound.
2. Enter the car and close the door. If your car has
interior light delay, wait until the light fades out.
3. Within 30 seconds turn the ignition from OFF
to ON and back to OFF the number of times for
your PIN code (5 times for the factory code) and
leave in the OFF position.
4. Wait 30 seconds until the siren stops. If the code
is correct the alarm will disarm. If the alarm does
not disarm the code was entered incorrectly.
The code can be any number between 5 and 15.
We recommend asking your installer to change it
to enhance the security of the system. Please make
a careful note of it if changed.
If you do not know your PIN and your remotes
don’t work please call your installer or refer to
www.avscarsecurity.com for more information.
