AVProEdge AC-DA-14X, User Manual

Page: 9 / 22

9
Front Panel Controls -Extracted Audio
The extracted audio is always active by default, you may simply plug into any/all of the ports (Toslink or
Balanced 2CH) and the audio will be output based on the active source. The Toslink ports supports up to
5.1Ch digital audio and the 5pin terminal connector supports 2Ch PCM. This means in order for the 5 pin
ANALOG L/R port to output audio, the sources have to be set to 2Ch PCM. This unit does NOT down mix
the audio (see the Axion series of matrices for down mixing). To get more than two channels you will want
to use the TOSLINK port.
NOTE: Pre-made 5pin terminal connector to 2Ch L/R cables are avalailble, product part number
is AC-CABLE-5PIN-2CH.
1. Press the ENTER button to enter the Main Menu. If the screen is off press the enter button again (the
first press will wake the screen up).
NOTE: EDID is the first menu and will default here every time you enter the Main Menu.
2. Use the UP/DOWN buttons to select “3-ExAudio”, press the ENTER button.
3. Use the UP/DOWN buttons to select either “1-ExAudio Off” or “2-ExAudio On”, press the ENTER button.
AC-CABLE-5PIN-2CH
Additionaly the extracted audio ports can be disabled/enabled via USB-C port and the command list
SET OUT1 EXA EN/DIS
- See page(s) 10-11 for command list details.