AVProEdge AC-DA-14X, User Manual

Page: 3 / 22

3
Introduction
The AC-DA-14X is an 8K HDMI distribution amplifier, scaler, and signal stabilizer. Able to
connected one HDMI source and repeat that signal throughout the 4 HDMI output ports.
Output port two and four have built in scalers allowing users to connect legacy TVs,
projectors, or AVR’s. This way you can send 8K signals to the connected 8K displays, and a
4K or 1080p signal to older models.
Full HDMI 2.1, FRL 40Gbps and HDR support ensures stable signaling even at the highest
of bandwidths. Install the distribution amplifier with confidence in your next bar, restaurant,
digital signage, commercial or residential install and see the difference.
Features
·
HDMI 2.1
·
FRL (5)
·
40Gbps Bandwidth Support
·
4K120 4:4:4 Support
·
Full HDR Support (HDR 10 & 12 Bit)
·
Dolby Vision, HDR10+ and HLG Support
·
HDCP 2.3 (and all earlier versions supported)
·
8K or 4K > 1080P Downscaling
·
8K > 4K Downscaling
·
Advanced EDID Management
·
LED screen on front
·
Extracted 2 Channel Audio via Phoenix Connector
·
Extracted Audio Now Supports DD+, DTS Master
Audio on Toslink
In The Box
• AC-DA-14X
•
12V Power Supply
• x1 5 Pin Terminal block for extracted audio port
• Mounting Brackets
*NOTE: Optional 5 Pin to Stereo Audio Cables available for purchase AC-CABLE-5PIN-2CH