AC-MX
1616
-
AUHD
pg.
6
AVProConnect ~ 3518 N Casco Ave. Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~
1.
Connect the HDMI input sources (Blu-ray, Set Top Box, etc...) to the AC-MX
1616
-
AUHD
2.
Connect the HDMI output devices (AVR, Display, Distribution Amplifier, Extender) to the AC-MX
1616
-
AUHD
3.
Power on the sources
4.
Connect the power supply's into the AC-MX
1616
-
AUHD
(You need to plug in both supply's)
5.
Turn on output devices/displays
6.
You may now use the front panel controls, supplied IR remote or free PC software to control the switch.
Front Panel Control
Switching:
The AC-MX
1616
-
AUHD
can be switched from the front panel by selecting the
OUTPUT
, Press ENTER, t
hen select the INPUT
:
1.
Press the button (1 through
16
) that corresponds with the OUTPUT (Display, or Sink Device) you
would like to send a source.
2.
Press ENTER
3.
Now select the desired INPUT on (1 through
16
)
4.
The route is now set.
5.
You may also navigate to the "Switch" Menu on the Control Screen to manage the
routes
(See "Switch Routing" below)
Figure 1
–
Switching with the front panel controls. NOTE: Select the OUTPUT and then
press ENTER, then
select
the INPUT
Basic
Setup
:
Quick Setup:
STEP 1:
Select
the desired OUTPUT
STEP 3:
Select the desired INPUT
STEP 2:
Press ENTER
