AC-MX
1616
-
AUHD
Extracted Audi
o:
The
extracted
audio ports ha
ve
distinct operating modes. Your desired mode can be set to suite your
particular installation.
The 3 modes are:
From Input
~ This is the default configuration. In this mode the audio port number co
rr
esponds to the INPUT
signal. This is ideal for systems where audio is matrixed sep
a
rately in a zoned amplifier.
From Output
~ This configuration will automatically have the audio follow OUTPUT, so the audio from the
extracted port always matches the HDMI output. This is ideal for systems that use local AVR's for some of the
zones.
Independent
/Matrix
~ This mode allows you matrix the extracted audio outputs independent of HDMI. In
this mode a new set of commands
becomes
available to be able to route audio however you want. This can
be used as a
separate
zoned audio matrix with only using an
amplifier
.
Setting up Extracted Audio Routing:
You can set up Extracted Audio Routing in the PC Software, Driver or by sending the following command:
SET EXA MODEy
-- Where (y=0-2) 0=From Input, 1=From Output, 2=Independent.
If you set to "Independent" a new set of commands is available to you to matrix the ports:
SET OUTx EAS INy
-- Where (x=
0
-
16
)
0=ALL, 1-
16
=Desired Output
& (y=1-
16
) 1-
16
=Desired Input
NOTE: Extracted Audio Ports are PCM
2CH
audio up to
LPCM
6 CH,
Dolby Digital 5.1 & DTS. N
o
down-mix.
Audio Diagr
a
ms:
pg.
16
AVProConnect ~ 3518 N Casco Ave. Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~
