AC-MX
1616
-
AUHD
Command List cont:
== Input Setup Command: (Note:input number(x)=HDMI(x),x=1-16) ==
== SET INx EDID y : Set Input x EDID{x=[0~16](0=ALL), y=[0~32]}
==
==
==
== 0:1080P_2CH(PCM) 1:1080P_6CH 2:1080P_8CH
==
== 3:1080P_3D_2CH(PCM) 4:1080P_3D_6CH 5:1080P_3D_8CH ==
== 6:4K30Hz_3D_2CH(PCM) 7:4K30HZ_3D_6CH 8:4K30HZ_3D_8CH ==
== 9:4K60Hz(Y420)_3D_2CH(PCM) 10:4K60Hz(Y420)_3D_6CH 11:4K60Hz(Y420)_3D_8CH ==
== 12:4K60HZ_3D_2CH
13:4K60HZ_3D_6CH 14:4K60HZ_3D_8CH ==
== 15:1080P_2CH(PCM)_HDR 16:1080P_6CH_HDR 17:1080P_8CH_HDR ==
== 18:1080P_3D_2CH(PCM)_HDR 19:1080P_3D_6CH_HDR 20:1080P_3D_8CH_HDR ==
== 21:4K30Hz_3D_2CH(PCM)_HDR 22:4K30Hz_3D_6CH_HDR 23:4K30Hz_3D_8CH_HDR ==
== 24:4K60Hz(Y420)_3D_2CH(PCM)_HDR 25:4K60Hz(Y420)_3D_6CH_HDR 26:4K60Hz(Y420)_3D_8CH_HDR ==
== 27:4K60Hz_3D_2CH(PCM)_HDR 28:4K60Hz_3D_6CH_HDR 29:4K60Hz_3D_8CH_HDR ==
== 30:USER1_EDID 31:USER2_EDID 32:USER3_EDID ==
== SET INx EDID CY OUTy : Copy Output y EDID To Input x(USER1 BUF) ==
==
{x=[0~16](0=ALL), y=[1~16]}
==
== SET INx EDID Uy DATAz: Write EDID To User y Buffer of Input x ==
==
{x=[0~16](0=ALL), y=[1~3],z=[EDID Data]
==
== GET INx EDID : Get Input x EDID Index
==
==
{x=[0~16](0=All)}
==
== GET INx EDID y DATA : Get Input x EDID y Data ==
==
{x=[1~16],y=[0~32}
==
==----------------------------------------------------------------------------------------==
== IR Code Setup:
==
== SET IR SYS xx yy : Set IR System Code ==
==
{xx=[00~FFH],yy=[00~FFH]
==
== SET IR OUTx INy CODE zz : Set IR Data Code ==
==
{x=[1~16],y=[1~16],zz=[00~FFH]}
==
== GET IR SYS : Get IR System Code
==
== GET IR OUTx INy CODE : Get IR Data Code ==
== {x=[0~16](0=All),y=[1~16]} ==
==----------------------------------------------------------------------------------------==
== Network Setup Command: ( xxx=[000-255], zzzz=[0001~9999] ==
== SET RIP xxx.xxx.xxx.xxx : Set Route IP Address to xxx.xxx.xxx.xxx
==
== SET HIP xxx.xxx.xxx.xxx : Set Host IP Address to xxx.xxx.xxx.xxx
==
== SET NMK xxx.xxx.xxx.xxx : Set Net Mask to xxx.xxx.xxx.xxx
==
== SET TIP zzzz : Set TCP/IP Port to zzzz
==
== SET DHCP y : Set DHCP {y=[0~1](0=Dis,1=Enable)}
==
== GET RIP
: Get Route IP Address
==
== GET HIP
: Get Host IP Address
==
== GET NMK
: Get Net Mask
==
== GET TIP
: Get TCP/IP Port
==
== GET DHCP
: Get DHCP Status
==
== GET MAC
: Get MAC Address
==
============================================================================================
pg.
14
AVProConnect ~ 3518 N Casco Ave. Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~
Settings: Baud Rate 57600, Data Bits 8, No Parity, 1 Stop Bit
NOTE - Visit www.avproconnect.com to get the Notepad
version of the command list for easy copy/past access.
