9
Enter WEP key
or:
Enter WPA key
Then the network is using one of the encryption systems: Wired Equivalent Privacy (WEP) or Wi-
Fi Protected Access (WPA). You therefore need to enter the correct WEP or WPA password into
INDIO to get it to communicate with your network.
Only the person who set up the network in the first place knows this password; if that person is not
you then you need to find out what it is.
After 3 seconds, the display goes into the password entry mode:
<END
◄
►
A BCDEF>
█
To enter the password, use the knob or the UP/DOWN
UP/DOWN
UP/DOWN
UP/DOWN buttons to select each
letter/number/symbol of the password in turn, pressing OK
OK
OK
OK after each letter. Note that WEP and
WPA passwords are sensitive to upper and lower case characters so you must enter them
exactly.
After entering the final letter/number/symbol, select END
END
END
END and press OK
OK
OK
OK....
INDIO should now be able to connect to the network.
