Page 24 - 7. Troubleshooting
A2K-T4-V2.2 27/08/2014 11:19:00
Red
Red
Red
Red
Yellow
Yellow
Yellow
Yellow
Blue
Blue
Blue
Blue
7.
Troubleshooting
The ART2000 system includes many self-testing features. If there is an
internal problem in the system, the control module will usually detect the
problem and tell you about it.
The Status line on the display tells you if the system is happy and healthy,
or if there is something you need to worry about. “Running OK” means
that everything is good. “warning” means that there is a problem, but the
dimmer will carry on working.
7.1
System setup
You can display more information about the system by holding down the
X10 button and pressing the LEVEL button. (Above STORE)
Line A 001 Dmx ok Line B 001 No Dmx
Status Running ok Mode Test off
---------------
BAY STATUS
-----------------
Found Chan Control Temp OverTemp Run
Bay 1 Yes 12 123 20 No 81
Bay 2 Yes 12 456 21 No 71
Bay 3 No 00 789 -127 No 00
Bay 4 Yes 12 101 21 No 61
This screen shows the status of the bays, where:
Found
Yes
indicates module detected
No
indicates module not present or undetected
Chan
00
No channels detected
12
12 channel dimmer or relay module detected
6
6 channel dimmer module detected
