Avocent Outlook 180DX, Installer/User Manual

Page: 35 / 56

Chapter 3: Basic Operations
29
( – ) keys to select the number of minutes, from 1 to 254, before you want
your screen saver to engage.
6. Use the Down Arrow key to highlight either the Time Delay, Mode or Test
fields and press Enter to activate the password change.
7. After the screen saver mode engages, you can press any key on the
keyboard to activate the user station.
NOTE: Activation of the screen saver mode disconnects the user from a server.
To exit the screen saver mode:
Press any key or move your mouse. The OSCAR Selection screen appears.
To turn off the screen saver:
1. If you are in screen saver mode, press any key on your keyboard and then
type your password if your console is password protected.
2. In the Advanced Menus screen, highlight Setup - Security and press Enter .
The Security Configuration screen appears.
3. Highlight Time Delay and use the Plus ( + ) or Minus ( – ) keys to select
Off . Press Enter .
Broadcasting to Servers
Use the Broadcast Settings screen and Broadcast command to simultaneously
control more than one server in a system. This feature is useful when you
want to ensure that all selected servers receive identical input. For each server
receiving the broadcast, you can choose to broadcast keystrokes and/or mouse
movements independently. In a cascaded system, you can broadcast to any
combination of servers in the entire system.
To access the Broadcast Settings screen:
1. Press Print Screen then F2 to access the Advanced Menus screen.
2. Highlight Setup - Broadcast . and press Enter . The Broadcast Settings
screen appears.
Figure 3.8: Broadcast Settings Screen