Avocent LONGVIEW X30 -, Installation & User Manual

Page: 23 / 74

Chapter 2: Installation 13
NOTE: If you configured the transmitter for a serial mouse, connect your serial mouse into the serial COM port
on the rear of the receiver. If you are using a PS/2 mouse and you are extending your server’s serial COM port
for some other peripheral, connect this peripheral into the receiver’s serial COM port.
5. Connect the circular power plug from the power supply into the 24 VDC .5A port on the rear
of the receiver. Next, connect the power supply to a convenient electrical outlet. Verify that the
power light on the front of the receiver is lit.
6. Power up your server and monitor.