Chapter 3: Operations
17
To configure network settings for the Transmitter:
1.
Activate the serial menu as described in
Accessing the serial menu
on page 14.
2.
Choose option 2 to access the Transmitter menu. If the password option is enabled, you will be
prompted for a password. See
Authentication
on page 24.
3.
Type the password and press
Enter
. The Transmitter
Main Menu will appear.
Figure 3.3: Transmitter Main Menu
NOTE:
The Reset
option in the Transmitter Main Menu applies only to network settings.
4.
Choose
Network Configuration
. The Network Configuration Menu will appear.
Figure 3.4: Network Configuration Menu