Avnet PicoZed FMC V2, User Manual

Page: 3 / 42

3 22 Sept 2016
v1.1
1 Introduction
The PicoZed FMC Carrier Card Version 2 (PZCC-FMC-V2) is a development board designed for
customers to easily evaluate the Avnet PicoZed System On Module (SOM) boards. This board
provides an I/O breakout platform for the PicoZed SOMs. The PZCC-FMC-V2 provides all
necessary SOM power, reset control and SoC I/O pin accessibility through the JX1, JX2, and JX3
MicroHeaders.
This document details the specific features, operation and configuration of the PZCC-FMC-V2
board.
Please visit
http://picozed.org/product/picozed-fmc-carrier-card-v2 for the latest product information.
1.1 Glossary
Term Definition
MIO Multiplexed Input Output – the dedicated I/O available on the PS
PL Programmable Logic
POR Power On Reset
PS Processing System
SMPS Switch Mode Power Supply
SOM System On Module
SoC System On Chip – Xilinx Zynq®-7000
Pmod Peripheral Module
FMC FPGA Mezzanine Card
LPC Low Pin Count
Table 1 – Glossary of Acronyms
1.2 Additional Documentation
Specific Zynq pin connections are not called out in this document. These are available in either the
PicoZed FMC Carrier Card V2 Pinout Tables or Programmable Logic Master User Constraints
available on the PicoZed FMC Carrier Card V2 documentation page:
http://picozed.org/support/documentation/13076
Avnet PicoZed products information:
Additional information and documentation on Avnet’s
PicoZed product line
can be found at
www.picozed.org .
Xilinx Zynq information:
Additional information and documentation on Xilinx’s Zynq®-7000 All Programmable SoCs can be
found at
www.xilinx.com/zynq .