88
WLAN Connection Is Not Established
4.
Select the “WLAN / Security” menu.
5.
Select the desired encryption and enter the encryption
data.
6.
Click the “Apply” button.
A window is displayed with the WLAN security settings.
Print out the page by clicking the “Print Page” button.
7.
Remove the network cable and check the configuration
of the WLAN adapter in the printout. Try again to estab-
lish a connection.
Testing the WLAN Connection Without Security Settings
Disable the WLAN security settings to test whether a WLAN
connection between the FRITZ!Box and the WLAN adapter is
possible at all.
1.
Connect the FRITZ!Box to a computer using a network ca-
ble. Proceed as described in the section
Computer to the LAN Port from page 16
.
2.
Open the user interface in a web browser. Proceed as de-
scribed in the section
3.
Go to the “WLAN / Security” menu and select “non-enc-
typted”. As a final step, click “Apply”.
4.
Remove the network cable and try again to establish a
connection.
If the attempt to connect to the WLAN using the non-encrypt-
ed connection is not successful either, check the installation
of the WLAN adapter and contact the manufacturer of the
WLAN adapter if necessary.
Enable WLAN encryption again after completing the tests. Fol-
low the steps listed above and then enable the kind of en-
cryption that was previously configured.
This non-secured condition should be used only for test-
ing, to find out whether a WLAN connection is possible
at all.
