AV-OL-KT-A1 - Obstruction Light Kit
Installation & Service Manual
Latest products and information available at
www.avlite.com
37
7.3 Testing Procedure
Note:
Avlite recommends that all testing be done during the day.
1.
Power the system on.
2. Check that no circuit breakers have tripped.
3. 4. Check function of all lights (i.e. L-864 and all L-810(F) lights) by carrying out the
following:
a. Night mode: Cover the External Photocell and check night operation is functioning
as expected. All lights should be illuminated red and flashing in synchronization.
b. Day mode: Uncover the External Photocell and check day operation is functioning
as expected. All lights should be off.
4. Turn the Photocell Bypass Switch to Override and ensure that all lights illuminate in
night mode.
5. Turn the Photocell Bypass Switch back to Auto.
6. For 01 & 02 Variants only:
Trip the breaker for the L-864 and ensure that the corresponding alarm is
received (if monitoring is installed)
Trip the breaker for the L-810(F) lights and ensure that the corresponding alarm is
received (if monitoring is installed)
DC Installation:
Connect the positive DC conductor to circuit breaker 1.
Connect the negative conductor to the common terminal block adjacent to the circuit
breaker on terminal block 1.
