background image

Latest products and information available at www.avlite.com

27

AV-09-4WL Solar Windsock Light Kit

5.  No modifications to the original specifications determined by Avlite shall be made without written 

approval of Avlite Systems.

6.  Avlite lights can be fitted with 3rd party power supplies and accessories but are covered by the 3rd 

party warranty terms and conditions. 

7.  The product must be packed and returned to Avlite Systems by the customer at his or her 

sole expense. Avlite Systems will pay return freight of its choice. A returned product must be 
accompanied by a written description of the defect and a photocopy of the original purchase 
receipt. This receipt must clearly list model and serial number, the date of purchase, the name and 
address of the purchaser and authorised dealer and the price paid by the purchaser. On receipt 
of the product, Avlite Systems will assess the product and advise the customer as to whether the 
claimed defect is covered by this warranty.

8.  Avlite Systems reserves the right to modify the design of any product without obligation to 

purchasers of previously manufactured products and to change the prices or specifications of any 

product without notice or obligation to any person. 

9.  Input voltage shall not exceed those recommended for the product.
10.  Warranty does not cover damage caused by the incorrect replacement of battery in solar lantern 

models.

11.  This warranty does not cover any damage or defect caused to any product as a result of water 

flooding or any other acts of nature.

12.  There are no representations or warranties of any kind by Avlite or any other person who is an 

agent, employee, or other representative or affiliate of Avlite, express or implied, with respect to 

condition of performance of any product, their merchantability, or fitness for a particular purpose, or 

with respect to any other matter relating to any products.

Limitation of Liability

To the extent permitted by section 68A of the Trade Practices Act 1974 (Cth), the liability of Avlite 
Systems under this Warranty will be, at the option of Avlite Systems, limited to either the replacement 
or repair of any defective product covered by this Warranty. Avlite Systems will not be liable to Buyer 

for consequential damages resulting from any defect or deficiencies in accepted items. 

Limited to Original Purchaser 

This Warranty is for the sole benefit of the original purchaser of the covered product and shall not 

extend to any subsequent purchaser of the product.

Miscellaneous

Apart from the specific warranties provided under this warranty, all other express or implied warranties 

relating to the above product is hereby excluded to the fullest extent allowable under law. The warranty 

does not extend to any lost profits, loss of good will or any indirect, incidental or consequential costs or 

damages or losses incurred by the purchaser as a result of any defect with the covered product.

Warrantor

Avlite Systems has authorised distribution in many countries of the world. In each country, the 
authorised importing distributor has accepted the responsibility for warranty of products sold by 
distributor. Warranty service should normally be obtained from the importing distributor from whom 
you purchased your product. In the event of service required beyond the capability of the importer, 

Avlite Systems will fulfil the conditions of the warranty. Such product must be returned at the owner’s 

expense to the Avlite Systems factory, together with a photocopy of the bill of sale for that product, a 
detailed description of the problem, and any information necessary for return shipment. 

Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor.  

Avlite products are subject to certain Australian and worldwide patent applications. 

Summary of Contents for AV-09-4WL































Reviews: