Latest products and information available at www.avlite.com
6
AV-09-4WL Solar Windsock Light Kit
Assembly & Installation
The installation of the AV-09-4WL Solar Windsock Light includes the following steps:-
• Unpacking
• Initial Inspection
• Assembling the solar panel and mounting frame
• Installing the battery box cage and solar panel
• Installing the battery with battery box
• Assembling and installing windsock lights
• Wiring of completed assembly
Tools required
• Adjustable spanner
• 6mm Allen key
Unpacking Instructions
Unpack all hardware and verify container contents in accordance with Figure 3 “Assembly of Solar
Panel and Mounting Frame”. Please contact your Avlite office if there is any hardware missing.
Initial Inspection
Inspect all hardware for damage. If there is any damage, please contact your Avlite Office.
Note:-
If the solar panel and mounting frame have been supplied pre-assembled then proceed to
‘Installation of the Solar Panel & Battery Box Cage’ section of this manual.
Assembly
Refer to Figure 3 “Assembly of Solar Panel and Mounting Frame”.
Assembling the panel & frame
The 120W Solar Panel (Ref 3.1) is attached to the Mounting Frame (Ref 3.2) using bolts (Ref 3.3),
washers (Ref 3.4) and nuts (Ref 3.5).
a. Insert bolts through the holes in the mounting frame, entering from the side of the angle.
b. Fit the Solar Panel flush against the Mounting Frame.
c. Install a washer and a self locking nut on each bolt. Tighten using spanner.
Assembly of the Solar Panel & Mounting Frame
Figure 2 Leading Dimensions of AV09
