AvL Technologies AAQ TLE Tracking Module Set Up And Operation Manual Download Page 2

Page: 2 / 29

TLE Tracking Module Operations

Guide

AvL Technologies

| Proprietary – Content is Subject to Change without Notice

Revision History

Date

Revision

Approved

Revision Description

2/22/16

Rev. 1.0

Initial Release for 11.6

2/25/16

Rev. 1.1

Updates to Configuration items

3/9/16

Rev. 1.2

Additions to monitoring Section

6/28/16

Rev. 11.6.0

Change to revision sequence and additions

to Configuration items

9/21/16

Rev. X11.7

Updates for X11.7

10/21/16

R11.8.0

Updated for R11.8, added approved by in

revision history

3/22/17

R.11.9.0

WL/AY

Updated for R11.9.0

Contents

1. Introduction ........................................................................................................................................................................ 3

1.1. Overview ....................................................................................................................................................................... 3

1.2. TLE Track Concepts ....................................................................................................................................................... 3

2. Setup Guide ......................................................................................................................................................................... 4

2.1. Hardware ...................................................................................................................................................................... 4

2.2. Software ....................................................................................................................................................................... 4

2.3. Hardware Connection .................................................................................................................................................. 4

2.3.1. Serial Communication Connection ........................................................................................................................ 4

2.3.2. Ethernet Communication Connection ................................................................................................................... 4

3. Configuration ...................................................................................................................................................................... 5

3.1. Core Configuration Items ............................................................................................................................................. 5

3.2. Target Configuration Items .......................................................................................................................................... 8

Summary of Contents for AAQ TLE Tracking Module






























Search results

Summary of Contents for AAQ TLE Tracking Module

Reviews:

Related manuals for AAQ TLE Tracking Module

Brands by name

Popular brands

AvL Technologies AAQ TLE Tracking Module, Set Up And Operation Manual

Search results

Summary of Contents for AAQ TLE Tracking Module

Reviews:

Related manuals for AAQ TLE Tracking Module

Brands by name

Popular brands