AAQ Maintenance Server
AvL Technologies
| Proprietary – Content is Subject to Change without Notice
10
Name
Type
Description
Restore_Points
Directory
May contain up to three separate system restore points,
namely “Factory_Restore.enc,” “Master_Restore_001.enc,” and
“Master_Restore_002.enc” files.
Factory_Restore.enc
File
Contains system settings and software as the antenna left the
factory.
Master_Restore_001.enc
File
Contains system settings and software before*. sup or backup
was applied to the system OR from when the most recent
backup was created. It contains whichever occurred last. See
Master_Restore_002.enc
File
Contains system settings and software prior to the second most
recent software update, restore point creation, or use of
restore point. This is a copy of restore point 1. The old restore
point 2 gets deleted. See
Software_Updates
Directory
The only Read/Write directory on the FTP server. It is used to
receive Software Update Package (*.sup) or Restore Point
(*.enc) files. Any properly encoded *.sup or *.enc files may be
uploaded into this directory, and will be applied to the system
upon reboot or power cycle.
Logs
Directory
Contains file “Update_Log.log” that summarizes all software
update or system restore activities that have been performed
on the controller and contains detail logs for each uniquely
named software update package or restore point that has been
applied to the controller.
Figure 6 - Restore Point Transitions
