AAQ Maintenance Server
AvL Technologies
| Proprietary – Content is Subject to Change without Notice
19
7.5 Format for Splitting the Software Update File
If a system has particular bandwidth constraints for transport of software update files, an individual software
update file may be split into multiple files for transport to the AAQ. If the Software Update Package is split, each
file must be named with two additional extensions following the (*.sup) as indicated in Table 3.
Table 3: Split Software Update Package Naming
Filename.sup.003.000
Filename.sup.003.001
Filename.sup.003.002
Filename.sup.003.003
The first of the two extensions is a three number digit code representing the end of the last required filename
(number of files minus one). The second extension is a three digit number code representing the sequential re-
construction order of the parts, beginning with a zero-index. Any split file must abide by this formatting
guideline to be properly processed. These split files are provided by AvL upon request.
8.
Applying Restore Point Procedure
Manually applying restore points can be performed with the following steps
Locate the appropriate *.enc file to load into the system
Login into the AvL AAQ Controller FTP Server, as shown in section 7.3 of this document.
a.
Username: avlftp
b.
Password: avlftp
Upload the *.enc file into the “Software_Updates” Directory
Re-boot or power cycle the system.
The system may take up to 10 minutes to reboot. Do not power off
the system during this time.
Login to the AvL AAQ Controller FTP Server
Read the “Logs\Update_Log.log” document to verify a successful software update
Using Maintenance Server to apply restore points can be performed with the following steps If the restore points
were created by the Maintenance Server and have not been removed from the system refer to section 6 of this
document for more detail.
Open the Maintenance Server
restoreBackup1 command will revert to the most recent restore point and reboots the system
restoreBackup2 command will revert to the second most recent restore point and reboots the
system
