112
WiFi
Configurable in Access Point Mode or Client Mode
Maximum simultaneous connections to Access Point: 10
Frequency Band: 2.4 GHz or 5 GHz
Dynamic list of channels (Access Point Mode):
•
1 to 11 for 2.4 GHz
•
36, 40, 44 and 48 for 5 GHz
Latency
(end to end)
User configurable
•
VBR: 800 ms to 10 s
•
CBR: 500 ms to 10 s
Interfaces
Audio/Video
3G-SDI Input
3G-SDI Output
Connector type: BNC connector
Impedance: 75 Ohms
Complies with SMPTE 259M, SMPTE 292M and SMPTE424M level A and level B-
DS (limited to one SDI stream for level B-DS)
Supported Embedded Audio at 48kHz
HDMI Input
HDMI Output
Connector type: Type A
Complies with HDMI 1.4
Fully Shielded HDMI cable is mandatory
Analog Audio
Input / Output
Connector type: Mini-XLR (Male, 5 pins)
Mates with
Rean/Neutrik RT5FCT-B (Female, 5 pins)
Switchcraft Mini-XLR TA5F Series (Female, 5 pins)
Pins (Mating plugs)
1: Common GND
2: Balanced Input Hot (+)
3: Balanced Input Cold (-)
4: Microphone Input
5: Headphone/Line Output
Balanced channel input impedance: 59.6 k
Ω
Balanced channel input level (nominal): 4 dBu (1.23 Vp)
Balanced channel input level (0dB Full Scale): 18 dBu (8.7 Vp)
Balanced channel input level (max): 19.4 dBu (10.2 Vp)
Headphone Dynamic Range (20 kHz Filter): 101 dB
Headphone THD+N: -70 dB max
HeadPhone Load Impedance: 16
Ω
or higher
HeadPhone Output Power: 55.8 mW max (16
Ω
)
Line full scale output voltage: 0.97 V
RMS
Line load impedance (typical): 10 k
Ω
Microphone Bias: 2 V
Microphone Maximum Level : 0.5 V
RMS
