AVIWEST AIR Series User Manual Download Page 86

Page: 86 / 116

From the Web Interface

Click on

to check that the unit settings are configured and selected as required:

•

Live profile

•

Auto-record mode (OFF / ON)

•

Record profile

•

Auto-forward option (OFF / ON)

•

Destination profile

Note:

•

If you enabled the Auto-record option, the video file is automatically recorded during

the live.

•

When the Live Profile is configured to encode the video in H.265 format, the Record

profile used for Auto-Record must be in H.264 format.

Click on

to start the Live.

Some indications appear on screen:

Note:

To stop the Live:

Click on

A popup appears.

Click on or the

icon to stop the video transmission.

Transmission bitrate

End to end latency /delay
configured in the Live Profile

Remaining recording time
possible on SD card (when
record is enabled)

Space percentage used on

SD card (when record is
enabled)

Progress bar indicating
remaining space on SD card

Stop Live button

Stop Record button

Duration of the Live in progress

Indication of the kind of action started

Real-time graph

Summary of Contents for AIR Series





















































































































Search results

Summary of Contents for AIR Series

Reviews:

Related manuals for AIR Series

Brands by name

Popular brands

AVIWEST AIR Series, User Manual

Search results

Summary of Contents for AIR Series

Reviews:

Related manuals for AIR Series

Brands by name

Popular brands