AVIWEST AIR Series User Manual Download Page 31

Page: 31 / 116

Configuring a 3G/4G/5G Cellular Interface

Note: Not applicable for AIR200, AIR300 and AIR300e.

Inserting the SIM card

Make sure that your SIM card is unlocked.

Note: In some cases, you may need to identify the unit IMEI (International Mobile

Equipment Identity). To know how to access this information, please refer to

Getting the

IMEI number

chapter.

Insert the SIM card into a slot on the unit rear panel.

The unit is equipped with 2 modems. Each one allows inserting up to 2 SIM cards:

•

Modem 1 uses slot 1A and slot 1B.

•

Modem 2 uses slot 2A and slot 2B.

Assigning a Slot to a Modem

You need to assign a slot to the modem according to the SIM card(s) that you want to use.
This assignment is independent for Modem 1 and Modem 2.
For each modem you can select either:

•

Auto (Automatic Slot Assignment)

•

Slot A

•

Slot B

When Automatic slot assignment is selected, the unit automatically assigns the relevant slot

according to the following table:

SIM card in slot A

SIM card in slot B

Assigned Slot







Modem 1

Modem 2

Summary of Contents for AIR Series





















































































































Search results

Summary of Contents for AIR Series

Reviews:

Related manuals for AIR Series

Brands by name

Popular brands

AVIWEST AIR Series, User Manual

Search results

Summary of Contents for AIR Series

Reviews:

Related manuals for AIR Series

Brands by name

Popular brands