AVITON AZ291MA User Manual Download Page 28 | Manualshive

Page: 28 / 84

background image

28

Icon

Type

Description

where GPS position is not yet available) the warning continues. Just
tap the speed camera symbol displayed on the screen to stop the
warning.
Tap again to display the second route event with the possibility to open
the Itinerary.

Red light

These cameras check if you obey traffic lights. The warning is similar
to mobile speed cameras: as there is no speed limit given, only the
proximity is announced.

2.4.10.2 Camera directions

A speed camera can measure the speed of one direction of the traffic, both directions, or even several
directions in an intersection, when they are mounted on a rotating base. The same directions apply to
red light cameras. AZ291MA warns you only if you drive in a measured or possibly measured
direction. The measured direction of the camera appears with the following symbols:

Icon

Description

The camera checks speed in the direction into which you are driving.

The camera checks speed in the opposite driving direction.

The camera checks speed in both directions on the road.

The camera can check speed in any direction.

2.4.11 Speed limit warning

Maps sometimes contain information about the speed limits of the road segments. This information
may not be available for your region (ask your local dealer) or may not be fully correct for all roads on
the map.
You can configure AZ291MA to warn you if you exceed the current limit. Tap the following buttons:

,

,

,

.

When you exceed the speed limit, the following happens:

•

Visible Warning: A symbol with the speed limit appears in the corner of the map (for example:

).

•

Audible Warning: A voice message is played using the selected voice guidance profile.

«
...
26
27
28
29
30
...
»

Summary of Contents for AZ291MA





















































































Reviews:

No comments

Related manuals for AZ291MA

Brand: Eclipse Pages: 8

Brand: Eclipse Pages: 8

Brand: Eclipse Pages: 122

Brand: Eclipse Pages: 12

Brand: VDO Pages: 2

Brand: Delphi Pages: 8

Stealthbox SB-GM-4GSUVCNSL/10TW1

Brand: JL Audio Pages: 7

Brand: Graco Pages: 20

Brand: Crutchfield Pages: 8

Brand: KAP Pages: 32

Brand: Denson Pages: 44

Brand: Normwandler Pages: 2

Brand: Caliber Pages: 342

Brand: Car Solutions Pages: 51

Brand: Toyota Pages: 22

Brand: Steren Pages: 34

Brand: Orbit Pages: 33

VISION NAVICENTER

Brand: EXS Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands