42
Alternatively, close the Phoenix-G software and select
Yes
when prompted to save.
2.14 Saving a Preset
All the presets you create (up to 23) are stored in the Sequoia, not in the computer that is running the
Phoenix-G software. In order to write all the presets into the internal flash memory of the Sequoia after
creating it you will need to save to flash. To save a preset, perform the following steps:
Step 1. Configure the layout you want the Sequoia to display.
Step 2. Click
Save File
in the
Option
window.
Step 3. Enter a unique filename for the preset and select
OK
to save. The fil
e extension “GP#” will be
automatically added to the file name.
Figure 2-75
Phoenix-G Software:
“Save File” Window Enter Unique Filename
Step 4. Repeat the above steps for each additional preset.
Step 5. After you are done creating presets load the file that you want to be the master layout which
gets loaded when the module is powered on.
Step 6. Close the Phoenix-G software and select
Yes
when prompted to save to flash.
