To Operate the Vehicle While Remote Started:
1. If the alarm system is armed, press the remote ARM/DISARM button for 1-2
seconds. The alarm will disarm and the doors will unlock.
2. Enter the vehicle (do not touch the brake pedal), turn the ignition key to
the "ON" position and then press the brake pedal. Pressing the brake pedal
will shut off the remote start and parking lights but the engine will remain
running.
3. You can now drive the vehicle.
To Shut Off Remote Start:
At any time while the engine is remote started, you can shut off the engine
with the remote control by pressing the remote control START button for 1-2
seconds. The engine and parking lights will shut off.
User-Programmable Temperature-Controlled Starting
I
CAUTION: Do not activate Temperature-Controlled Starting while
the vehicle is in an enclosed area.
The AviStart system can be programmed to automatically start the vehicle
engine whenever the temperature inside the vehicle reaches or drops below
the preprogrammed temperature level. The AviStart will monitor the air
temperature every 2.5 hours and will only start the engine during extreme
cold temperatures. There are three temperature levels to choose from. (This
feature is programmed OFF from the factory and must be programmed ON to
operate.) (See the "Programming Table for System Features" on page 15).
To Activate:
Press the remote control TRUNK and START buttons at the same time. The
parking lights will turn on for 3 seconds, shut off for 1 second, turn on for 3
seconds and shut off. This will be your visual indication that you have
activated the Temperature-Controlled Starting feature.
When the temperature inside the vehicle reaches the preprogrammed
temperature level, the parking lights will flash 2 times, the vehicle will start
and the parking lights will turn on. The vehicle will run for 10 minutes and
then shut off. This will allow the engine to warm up and charge the battery.
12
AviStart 6500 Owner's Manual - 110698 Rev. B
