background image

 
 

 

 
 

 

 
 

 

 
 

 

 
 

 

 
 

 

 
 

 
 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Aritronix Ltd 

14435 N. Scottsdale Rd #500 

Scottsdale, AZ 85254 

Technical Assistance (480)951-1109 

 

 

 

 
 
 
 
 
 

 
 

OEM-500i/SR-i300 

Motorcycle Security System 

 

 
 

INSTALLATION MANUAL 

AND USER’S GUIDE 

 
 
 
 
 

 

 

 

 

 

 

 

FCC Notice 

 

This device complies with Part 15 of FCC rules. Operation is subject to the following two 
conditions: (1) This device may not cause harmful interference, and (2) This device 
must accept any interference that may cause undesired operation. 
 
Changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate this device. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 

Summary of Contents for OEM-500i

Page 1: ...Notice This device complies with Part 15 of FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference that may cause undesired operation Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this device ...

Page 2: ...Arm without Perimeter Sensor A Button Arm Disarm B Button When Armed C Button Silent Arm Disarm Panic Feature Violation Display When the system is disarmed the turn signals will flash to indicate that there has been an alarm trigger The lights will flash once to indicate that the system has been disarmed and additional flashes indicate the following trigger has occurred 1 flash then 1 additional f...

Page 3: ...m is still armed and protecting the bike 2 To disarm trigger the alarm and press the A button Alarm Triggers 1 If bike is bumped the siren will sound for 5 Seconds and the turn signal lights will flash 2 If the bike is tilted the siren will sound for 30 seconds and the turn signal lights will flash 3 If the ignition switch is turned on the siren will sound for 30 seconds and the turn signal lights...

Page 4: ... plugs into the MCM The wires should be connected as follows HAR 1 Black wire with fuse and ring terminal To battery Positive GEN 1 Black wire To ground Grey wire To turn signal power wire Left Grey wire To turn signal power wire Right Orange wire To tail light wire or any other wire that is hot when ignition is ON NOTE this is an input to the alarm this connection is not designed to flash the tai...

Reviews: