8
Measuring Object/ Liquid Temperature
1. Press the “Forehead Measure” button or “Power/Ear Measure”
button for 1 second to switch the thermometer on. Following a
successful self-test, the device emits two short beeps.
2. Then press the “Memory” and “SET” buttons simultaneously for
3 seconds to switch to the “Object Scan Mode ”.
The
symbol appears in the display.
3. Point the sensor tip towards the object or liquid (maintaining a
distance of 3 cm), then take one press on “Forehead Measure”
button or “Power/Ear Measure” button to take a measurement
(never immerse in liquids).
4. After the measurement process is complete, there comes a short
beep and the measured value appears on the display.
5. Please note that the displayed temperature is the measured and not
the adapted surface temperature. It is not the same as the
temperature.
6. To switch back to the thermometer mode, press the “Memory”
and “SET” buttons simultaneously for 3 seconds until the “
”
symbol disappears and there is a short beep.
