MADE IN CZECH REPUBLIC
BPT22
WIRELESS ROOM THERMOSTAT
with socket receiver
BPT22 is an ideal solution in places where installation of the thermostat-boiler wiring is too expensive or
totally impossible. It is intended for automatic control of heating systems in family houses and dwelling units
with their own boiler (gas, electric). The big, backlit display on the transmitter enables control of the
thermostat even in the dark. Moreover, it offers intuitive navigation in the selected language (CZ/PL/EN/DE).
The receiver is equipped with a code self-learning system and the E-EPROM memory which saves the code
stored even in the event of voltage failure. BPT22 works with two-way communication at the frequency of
433.92 MHz. The assembly may reach the range of up to 35 m (in built-up area).
•
Receiver mains supply of 230 V/ 50 Hz
•
Receiver with the
CODE SELF-LEARNING
system and E-EPROM memory (saving the
code even at voltage failure)
•
Two-wire connection to the boiler
(potential-free
contact)
•
Indicator LED signalling the states
- mains supply indication
- transmission/ reception of signals
- failure state
- relay switched
Receiver – into the socket
Transmitter
•
Big, well-arranged and backlit display
•
Intuitive navigation in the selected language
(CZ/PL/EN/DE)
•
Preset weekly program
•
6 temperature changes per every day
•
Programming by 10 minutes and 0.5 °C
•
Programming by days or Mon-Fri, Sat-Sun
and
Mon-Sun
•
HYSTERESIS selection from 0.1 °C to 6 °C
•
Possibility of short-term temperature change
•
Manual mode (MANU)
•
Permanent shutdown (OFF)
•
Holiday mode
•
Anti-freeze temperature (3 °C)
•
Function for testing the correct connection
(TEST)
•
Automatic SUMMER/WINTER time change
•
Supply by means of alkaline batteries
2 x 1.5 V/AA
- freely portable
- modern design
- stand for stable setting at the
optimum location
TWO-WAY COMMUNICATION
- guarantees reliability of signal transmission and
enables acquiring of return information
