4-4
4.3
Clean the scanner
In order to maintain the scanned image quality and prevent dust accumulation, it is
recommended that you clean the scanner (outer casing and feed rollers) approximately
every 200 scans, or if vertical lines or stripes appear on the scanned image.
Use only the recommended and supplied tools to clean the scanner.
WARNING:
Do not use any solvents or corrosive liquid (i.e., alcohol, kerosene, etc.) to
clean any part of the scanner, otherwise the plastic material may be permanently
damaged.
1.
Open the cover by holding the scanner with one thumb placing on the feeder and
another thumb placing on the cover. Carefully and firmly press your thumb into the
feeder and then raise the cover. This will cause the top of the scanner to release from
the bottom of the scanner.
2.
Gently wipe the glass and feed rollers on the scanner, and the CIS cover with the
cleaning cloth (included).
Glass
Feed Rollers