User’s Manual
Q
：
How can I tell if the scanner is scanning at 300 dpi, 600 dpi
or 1200 dpi?
A
：
The scan indicator light indicates the selected resolution: Green=
300 dpi, Orange=600 dpi, Orange flashing=1200 dpi (1200 dpi is
only available for the wand scanner – MiWand 2 Wi-Fi )
Q
：
Why there are strange lines on the scanned document?
A
：
Please check the following:
1.
Are there scratches on the original or is the original clean
？
2.
Remove any stains or dust from the original before scanning.
3.
Clean the rollers and glass with the included cleaning cloth.
(Refer to the section “Cleaning the Rollers and Glass))
Q
：
Will the scanner recharge my rechargeable batteries?
A
：
No, the scanner does NOT recharge rechargeable batteries. You
must use your own battery charging device.
Q
：
Why there is a red or gray background with lines on my
scanned image?
A
：
The scanner does not enough power to perform a scan. Charge
your batteries and restart the scan.
Q
：
Should the scanner feel warm to the touch?
A
：
It is normal for the scanner to emit a small amount of heat after
prolonged use. However, if there are strange odors coming from
the scanner or the scanner feels a little bit hot to the touch, turn
the scanner off immediately.
6-3
