manualshive.com logo in svg

Avision DL-1101S, User Manual

Share
Download
Avision DL-1101S User Manual Download Page 68

 

 

4-40 

 

By Length (Paper/Position: When a multi-feed is 

detected for the first time, the scanner memorizes the length of 

the document, the length and position of the object (photo or 

label) attached to the document. When you perform next 

scanning, this pattern of multi-feed will be bypassed. 

To use the intelligent mode, 

1.

 

Choose your desired multi-feed detecting method to 

bypass by.  

2.

 

When multi-feed occurs during scanning, a multi-feed 

warning message appears. 

3.

 

Choose OK to skip the multi-feed condition from next 

scanning and close the message.  

4.

 

Open your TWAIN data source in your scanning application. 

The same multi-feed condition will not be recognized as 

multi-feed. 

 

 
Note:  

1.

 

You can clear the previous multi-feed conditions by 

clicking the Reset button. 

2.

 

The scanner can memorize to bypass up to 25 multi-feed 

conditions. 

3.

 

If you uninstall your scanner driver, the previous multi-

feed conditions which have been set to memorize and skip 

will still be valid. 

 

 

Summary of Contents for DL-1101S


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands