Customizing the Product’s Settings
47
Wi-Fi Connection:
Wired LAN: If the device is connected to a wired LAN via an ethernet cable,
the Wi-Fi connection will automatically set to to AP mode. A wired LAN and a
wireless network can be working at the same time.
Wireless Network: If SSID has been connected successfully, the wired LAN
will not be working. If the device fails to connect to a wireless network (SSID),
the device will automatically enter Wi-Fi AP mode (the device itself is an AP).
Management
Factory Def.
Reset all settings to factory default
values.
Reset Count
Choose to reset count for roller or pad
after replacement. Click [immediate] to
reset count.
Tray 1 pad/
Manual Tray Pad
V-Mag
Adjustmnet
Choose to adjust the vertical
magnification rate of the printer.
-0.4%/-0.2%/*
0%/+0.2%/
+0.4 %
Wi-Fi Connection:
Wired LAN: If the device is connected to a wired LAN via an ethernet cable,
the Wi-Fi connection will automatically set to to AP mode. A wired LAN and a
wireless network can be working at the same time.
Wireless Network: If SSID has been connected successfully, the wired LAN
will not be working. If the device fails to connect to a wireless network (SSID),
the device will automatically enter Wi-Fi AP mode (the device itself is an AP).
Password Settings
New
Password
Enter a password to enable
modifying the web page.
Password should be 8~32
characters or digits in
length.
Retype
Password
Retype new password.
