User’s Guide
30
Setting the Product’s IP Address in a Wireless Network
To set an IP address to the product, you need to install the Network Setup Tool.
The Network Setup Tool is included in the USB printer driver. After the
installation of the USB printer driver is completed, the Network Setup Tool is
automatically installed onto your computer. Follow these steps to set and update
the IP address to the product in a wireless network:
You may also define your network connection via the web page. (See more details
in the subsequent section Customize System’s Settings via the Embedded Web
Page in Chapter 5.
To wirelessly connect the product to a network, you need to install a Wi-Fi dongle
to the product at the back of the USB port.
1.
Make sure the product is connected to your computer via a USB cable.
2.
Start the Network Setup Tool by choosing the Start button and then
select All Programs>AP30XX Printer>Network Setup Tool in
succession. The following Network Setup Tool screen will be prompted.
USB port
AP30 Series Printer
