Avision AD340GN User Manual Download Page 94

Page: 94 / 176

User’s Manual

4-45

For documents larger than A4/letter size, such as A3

Align the top of the document to the top of the Carrier

Sheet (the printed section) and the folded portion to the

right edge of the Carrier Sheet so that the document fits

into the Carrier Sheet at the upper corner.

For non-standard document

Center your document in the Carrier Sheet.

Load the Carrier Sheet with the gray section (printed

section) facing downwards.

Adjust the paper guides to the width of the Carrier Sheet.

Adjust the paper guides so that there is no space between

the guides and the Carrier sheet. Space between the

guides and Carrier Sheet may cause the Carrier Sheet to

become unaligned during scanning, and skew the scanned

image.

Start the scan.

Summary of Contents for AD340GN

















































































































































































Search results

Summary of Contents for AD340GN

Reviews:

Related manuals for AD340GN

Brands by name

Popular brands

Avision AD340GN, User Manual

Search results

Summary of Contents for AD340GN

Reviews:

Related manuals for AD340GN

Brands by name

Popular brands