Jump to: Table of Content
2022/04/11
Page : 24
5.6.3
Signal levels
Voltage range on CAN-H / CAN-L: 4 - 16V
Transceiver used: SN65HVD family by Texas Instruments. Other transceivers upon request
5.6.4
Terminating resistor
Whether or not there is a 120 ohm terminating resistor depends on the product:
Product No
Name
120 Ohm Termination
M43076 / C43076
CAN Silver
Can be switched on/off via
configuration
5.6.5
D-Sub Connector
–
1x CAN (“M43014”, “C43014”)
Industry standard SubD-9 connector (male)
Connector
Interface
Pin
Signal
Direction
D-Sub,
9 pol, male
2
nd
CAN
1
n.c. (optional: VCC)
Power
2
CAN-L
Bus
3
GND
Power & Signal
4
n.c.
5
n.c.
6
GND
Power & Signal
7
CAN-H
Bus
8
n.c.
