Jump to: Table of Content
2022/04/11
Page: 23
(Note: Picture shows a mistake: D+/D- are switched - see table below for correct wiring:)
Connector
Interface
Pin
Signal
Direction
Screw Type
1
st
RS485
1
GND
Power & Signal
2
VCC (6..32V)
Power
3
RS485 B / D+
RS485 Bus
4
RS485 A / D-
RS485 Bus
5
n.c.
6
n.c.
7
n.c.
8
n.c.
5.6
CAN
I
NTERFACE
This is an industry standard CAN interface
5.6.1
Default CAN settings
The baudrate needs to be configured using the Avisaro Companion Software.
The default baudrate is 250kBaud.
5.6.2
Storage format and network packaging
Please
check chapter “Avisaro Internal Data Formats” later in this document on how CAN messages are
stored on USB memory or forwarded over the network.
There are easy to read text formats as well as compact binary formats available.
