MRL DCP
Installation Guide
Ref No MU-875X0AV10A-GB Version 1
AC-2CD00-100-F-20-000
PRODUCT DESCRIPTION
The Machine-Room-Less (MRL) DCP is installed inside the landing controller panel and provides an
information gateway between all compatible connected devices in the elevator shaft and our online
monitoring platform the Avire Hub.
The MRL DCP has an in-built network signal strength scanner to measure the level of signal in its intended
installation location.
Use the MRL DCP as a two-way data link to:
- configure and monitor devices via MK CANBus using the Avire Hub
- remotely test elevators by connecting Lift HAWK
- monitor Pan light curtains
- update display layouts
- connect EN81-28:2018 compliant emergency communication
ITEMS REQUIRED FOR INSTALLATION
In the Box - MRL DCP
+
MRL DCP
+
P-3.5 H-2V connector (x1)
+
P-3.5 H-3V connector (x1)
+
P-3.5 H-4V connector (x1)
+
P-3.5 H-5V connector (x1)
+
Manual
In the Box - Battery Backup
+
Battery Backup
+
P-3.5 H-3V connector (x1)
+
P-5 BL2 connector (x1)
+
Wiring
Not Included
+
Screwdriver
+
DIN rail (check Lift Controller
for location to fix MRL DCP &
Battery Backup)
