AVIRA ANTIVIR UNIX MAILGATE, User Manual

Page: 102 / 114

Graphical User Interface (GUI)
100
AntiVir MailGate Avira GmbH
Mail Syntax settings
Accept email
with empty
sender
It is possible to receive messages without the sender's name. The default setting is
No, so that the SMTP server accepts all incoming emails. This default setting
should not be changed.
It sets
RefuseEmptyMailFrom
in
avmailgate.conf
.
RFC2821, RFC821 and RFC2505 recommend that all emails (even without the sender's
address) should be accepted by an SMTP server. However, it is recommended not to
change the default setting for the parameter
RefuseEmptyMailFrom
.
Allow "source
routing"
Source routing has the following address syntax:
@ONE,@TWO:JOE@THREE
This address sets the route for the email: it passes through
ONE
and
TWO
and it is
finally delivered to
JOE
on host
THREE
.
This option specifies whether all except
JOE@THREE
should be excluded (
NO
) or if
the address should be retained (
YES
)
It sets
AllowSourceRouting
in avmailgate.conf .