AVIRA ANTIVIR UNIX MAILGATE, User Manual

Page: 28 / 114

Installation
26
AntiVir MailGate Avira GmbH
4.4 Further Installation Steps, Depending on the MTA
After installing AntiVir MailGate as described above, you have to make some
manual settings, depending on your MTA.
The following part describes Sendmail, Exim, Qmail and Postfix specifics.
Configuring Sendmail
If you are working with Sendmail, we recommend that you use AntiVir MailGate in
Milter mode (see Chapter
Milter Mode – Page 13). It guarantees full SMTP functionality
in Sendmail (such as SMTP authentication).
Configuring Exim
AntiVir MailGate runs with Exim version 3.0 or newer.
To detect your Exim version:
X
Type:
exim -bV
There are two ways of integrating AntiVir MailGate with Exim:
z Integrate AntiVir MailGate as a content filter in Exim (recommended)
z
Proxy mode
Content Filter
AntiVir MailGate configuration
:
X
Modify (or add) the following entries in avmailgate.conf :
ListenAddress 127.0.0.1 port 10024
ForwardTo SMTP: 127.0.0.1 port 10025
X
Restart AntiVir MailGate.
Exim configuration
:
X
Modify (or add) the following entries in exim.conf :
# Listen on all interfaces on port 25
# and on 127.0.0.1 port 10025
local_interfaces = 0.0.0.0.25 : 127.0.0.1.10025
Add router entry:
X
Search for the entry
begin router
in
exim.conf
and add the following
entries:
# Router for AntiVir MailGate
antivir_mailgate:
debug_print = "R: AntiVir MailGate for