27
1) Local configuration
Video Preview Mode:
user can choose real-time priority or fluency priority. The delay will be smaller when under
real time priority mode, and fluency will be better when under fluency priority mode. Setting based on user’s need
(default value: real time best (1), real time normal (2), fluency normal (3), fluency good (4) and fluency best (5)).
Recording Packing Time (minute):
set recording video packing time (default is 3, range from 1~120 minutes).
Recording/Snapshot File Storage Route:
set local recording video/snapshot file storage route (default:
D:\MyIPCam\).
Click “
Save”
button to let setting changes take effects.
2) Audio configuration
Switch:
choose to enable/disable the audio.
Compressing Format:
set audio compressing format, and the device will reboot automatically after changing
(default: MP3, other options: PCM, AAC).
Sampling Frequency:
set sampling frequency, and the device will reboot automatically after changing (default:
44100, other options: 16000, 32000 and 48000).
Sampling Precision:
set sampling precision (default: 16bits).
Compressing Code Rate:
set audio compressing code rate (default: 64bits, other options: 32, 48, 96, 128bits).
Note:
click “
Save
”, and it will show the message “Enable has changed. Restart the device to take effect after the
success of the save.”. Please reboot the camera for the changes to take effects.
4.2.5 Video configuration
1) Video Encoding
Code Stream:
for different video output mode settings, use different streams (main stream, secondary stream)
accordingly.
Compression Format:
set the video compression format, save and reboot to take effect (main/secondary stream
default: H.264, other options: H.265).
Video Size:
set video image resolution, save and reboot to take effect (main stream default 1920 * 1080, other
options: 1280 * 720; secondary stream default 640*320, other options: 320*180, 1280*720).
Stream Rate Control:
set rate control mode, save and reboot to take effect (main/secondary stream default:
variable bit rate, other options: fixed rate).
Image Quality:
set image quality. Image quality can be changed only when rate control is set to variable bit rate
(main stream default: better; secondary stream default: good; other options: best, better, good, bad, worse, worst).
Rate (Kb/s):
set the video bit rate (main stream default: 8192Kb/s, other options: 64-20480Kb/s; secondary stream
default: 2048Kb/s, other options: 64-8192Kb/s).
Frame Rate (F/S):
set the video frame rate (main/secondary stream default: 25F/S; other options for main stream:
5-60F/S; other options for secondary stream: 5-30F/S).
Key Frame Interval:
set the key frame interval (main/secondary stream default: 75F, other options for main
stream: -300F; other options for secondary stream: 1-150F).
Key Frame Minimum QP:
default: 10, other options: 10~51.
Click "
Save
". Settings will take effect after the message "saved successfully" shows.
2) Stream Release
Switch:
to turn on/off the main/secondary stream.
Protocol:
main/secondary stream applies RTMP protocol.
