8
3. Application Instructions
3.1 Remote Control
3.2.1 Key Illustrations
Before using the remote to control AV-1364, the user needs to log in via IP first and turn
off the tracking mode (will be instructions in 4. Configuration Tools).
•
Standby key
After 3-sec long press, the camera will enter the standby mode. Long press the key
again for 3 secs, the camera will initialize again and return back to HOME position
(Note: when power-on mode is turned on and Preset 0 is set, if there is no operation
after 12 secs, the camera will automatically rotate to the specified preset position).
•
Camera address selection
Select the specific camera which the user wants control.
•
Number key
Set or run one of the preset positions (0~9).
•
【
*
】
and
【
#
】
key
Key combination is used to restore the default settings.
•
Focus control key
Auto focus:
【
AUTO
】
to enter auto focus mode.
Manual focus:
【
MANUAL
】
to manually adjust the camera focus by pressing
【
FOCUS+
】
or
【
FOCUS-
】
.
•
Zoom control key
【
ZOOM+
】
: near lens
【
ZOOM-
】
: far lens
•
Set or clear preset key:
Set preset position:
【
SET PRESET
】
+ number key (0~9).
Clear preset position:
【
CLEAR PRESET
】
+ number key (0~9).
•
Pan/tilt control key
Press
key: up
Press
key: down
Press
key: left
Press
key: right
“HOME” key: return to the center position or enter the submenu.
•
BLC control key
【
BLC ON/OFF
】
: turn on or off the back light.
•
Menu settings
【
MENU
】
: to open or close the OSD menu.
Enter/exit the OSD menu or return to the previous menu.
•
Camera IR remote control address settings
【
*
】
+
【＃】
+
【
F1
】
: Camera Address No.1
【
*
】
+
【＃】
+
【
F2
】
: Camera Address No. 2
【
*
】
+
【＃】
+
【
F3
】
: Camera Address No. 3
【
*
】
+
【＃】
+
【
F4
】
: Camera Address No. 4
•
Key combination functions
1)
【
#
】
+
【
#
】
+
【
#
】
: Clear all presets
2)
【
*
】
+
【
#
】
+
【
6
】
: Restore factory defaults
