Avipas AV-1362, User Manual

Page: 8 / 65

7
Figure 1.1.
AV-1362 series
1. Camera lens
2. Camera base
3. Remote Controller Receiver light
4. Bottom DIP switch
5. Tripod screw hole
6. Installation Orientation Hole
7. RS232 control interface (input )
8. 10/100M Network interface
9. DVI-I interface(including HDMI signal)
10. USB3.0 interface
11. DC12V Input Power Supply Socket
12. Power indicator
1.2 Power on Initial Configuration
1) Power on: connect DC12V power supply adapter with NO.11 in Figure1.1.
2) Initial configuration: Power on with power indicator light on and remote control receiver light
blinking,camera head moves from bottom left to the bottom,and then go to the HOME position
(intermediate position of both horizontal and vertical ),while the camera module stretches. When remote
control receiver light stops blinking,the self-checking is finished.
Note: If you set preset 0,when Power on initial configuration is completed,the camera automatically
moves to the preset 0 position.
1.3 Video output
AV1362 video output : LAN,DVI (HDMI),USB3.0 and USB3.0 is compatible with USB2.0.