Avipas AV-1362, User Manual

Page: 51 / 65

50
b, Restore default setting through camera menu menu
c, Restore default setting using shortcut key combination* # 6 restore on remote controller
If use option a,the account and passwords will also be restored to default.
5) Restore factory setting
Click on pop-up "Resto
re Factory Defaults" button and choose “yes” or “no”,then the device will restart
automatically and restore factory setting .
6) Reboot
Click on the pop-
up "Reboot" button and choose “yes” or “no”,then the device will restart automatically
4.2.8 Logout
Point "Logout" pop-
up "Confirmation" dialog; select "Yes" or "No",choose “Yes” to exit the current page
and return to the user login interface again.
4.2.9 Wireless network
If the user's equipment has a wireless network module,Web page "Network Configuration" has "Wireless
Network" configuration page,the specific configuration is as follows:
1
）
Network settings
Wireless network configuration:
Network interface enable: can check,to set the following items after checked
DHCP: checkable, it can obtain IP automatically if checked
IP address :set wireless WIFI IP(default 192.168.1.250,if checked DHCP,IP could assigned automatically)
Note: wireless IP address can not be in the same segment with wired IP address.
Subnet Mask: Set the wireless IP subnet mask (default255.255.255.0)
Default Gateway: Set the wireless IP default gateway (default 192.168.1.1)
SSID: The user can modify their own (the default test)
Encryption: checkable,the password can be set after checked
Password: can set password, password can be changed if only encryption checked
Click the " Save " button, when display "Parameter saved successfully", itt will take effect
Note: SSID and password should be filled correctly, otherwise the wireless WiFi connection will not be
available after restarting.