Avipas AV-1362, User Manual

Page: 23 / 65

22
3.1.2 Video output
Connect to the video output cable: the user select the output mode according to the machine model.
Figure 1.4.1 is for your reference (output interface introduction for each product)
1) Network output: connect this product and your computer through network cable,then open the
browser,enter the camera IP address (factory default 192.168.5.163) in the address bar,then to the login
page and input a user name and password (factory default are “admin”) ,Finally enter the preview
page,and the image comes out.
(Note: If you forget your user name,password,IP address,you can manually restore the default by the
remote controller key combination * #)
2) USB3.0 output: Connect this product with computer USB3.0 interface (blue),open the Device Manager
to see whether there is an image device and whether the Universal Serial Bus controllers recognize
USB3.0 device. After properly identified,open the software,choose the image device and then it will output
image.
3)USB3.0 compatible with USB2.0 output: Connect this product with computer USB2.0 interface
(black),open the Device Manager to see whether there is an image device and whether the Universal
Serial Bus controllers recognize USB3.0 device. After properly identified,open the software,choose the
image device and then it will output image.