manualshive.com logo in svg

Aviosys IP Power 9258 DS, User Manual, Page: 37 / 37

Share
Download
Aviosys IP Power 9258 DS User Manual Download Page 37

11.) Frequently Asked Questions (F.A.Q) 

Q1:

 How do I reset the device back to manufacturer default values? 

 

Ans:

 In the front panel of the 9258 DS, there is a reset feature that will reset the device back to 

manufacturer default settings. Take a pen or small pin, then press and hold for about 10-15 
seconds. Once you hear a single “beep” sound the device will be reset back to manufacturer 
default 
 

Default IP

: 192.168.1.100  (When 9258 DS is connected to PC directly) 

Default Login

: Admin 

Default Password

: 12345678 

 

Q2:

 What is dual switch technology? 

 

Ans:

 Dual Switch technology is an additional safety feature of the 9258 DS. Unlike conventional 

power distribution units or remote power control units the 9258 DS has a dual switch design 
which will completely cut off the power to the devices. Other designs which do not have this 
feature will may create a harmful environment that will affect the devices or the things around it. 
Below is a picture of   
 

Q3:

 How come I can not connect to my device from an outside network? 

Ans: 

To use the device outside of LAN (Local Area Network. If a router is present you will have to 

port forward the Local IP Address of the 9258 DS so that it could be reached by the outside world. 
Please refer to the manual on how to accomplish this task.  

 
 

 

 

 
 

 

- 37 - 

Summary of Contents for IP Power 9258 DS






































Reviews:

No comments