Please view the example below for more details:
In the picture above:
5.)
Power1 Ping
function is
enabled
6.) The 9258 DS will ping the web address
www.sample.com
7.) If there is a response within the
Ping Response Time
the 9258 DS will send
another ping signal the set
Ping Time Interval
which is 3 seconds
for this
example.
8.) If the 9258 DS does not receive a response from the device it will constitute a
Ping Failure
.
9.) After 3 consecutive failure the device will go to the
Action Delay
section. In this
case the device will delay for 3 seconds.
10.) When action delay has been reached the
Action
will be set off. Here we have set
the 9258 DS to
Reset
the device.
11.) Once the device has been reset the 9258 will go into
Startup Delay
mode. In this
case it is 3 seconds.
12.) After the startup delay mode has been reached the 9258 will check the
Startup
Action
whether to continue or stop pinging the device. Here we have it set to
Continue.
13.) Then the process starts all over.
- 28 -