2.)
Open IPEdit and any device in the same network should automatically be detected and
listed in the
local devices sections
.
The devices will need to be setup correctly
through IPEdit so that you can properly access the device.
3.)
Setup the Device:
All devices will need to be on the same network if not the device cannot be accessed and will
not be detected.
a.
Quick Easy Setup (Recommended)
7.) Click on the REF button,
and wait a few seconds. IPEdit will
automatically detect the network settings and setup the device.
8.) Once settings have been detected hit the apply button to apply the new settings.
- 14 -
