Avio iP-40, User Manual, Page: 12 / 57

E-10
A Check of the Supplied Items and the Names of the Parts
Names and Functions of the Parts (Input Connectors)
1. Test (maintenance) connector
This special connector is used at the time of maintenance
and factory tests. It cannot be used for other connections.
2. Computer/video (D terminal output) video input connector
Use this input terminal for connection to a computer’s ana-
log RGB input connector or a video deck’s D connector
output using an RGB conversion cable (sold separately).
See pages E-16 and 20.
3. Video input connector
This input connector is for use with the video (NTSC / PAL
/ SECAM). See Page E-20.
4. Audio input connectors for the video
Audio input connectors for use with the video. (Stereo sup-
ported)
See Page E-20.
5. Computer audio input connector
This audio input connector is used for connection to a com-
puter (stereo compatible).
See Page E-16.
6. SD memory card insertion slot
SD memory card access LED *
During the SD memory card access, the SD memory card
access LED goes on in green.
• When the SD memory card is pulled and inserted imme-
diately, the SD card may not be capable of being recog-
nized. Leave it for several seconds before inserting the
SD memory card.
• While the access LED of the SD memory card is ON, do
not insert or remove the SD memory card.
Negligence to observe it causes the product or SD
memory card to fail.
* Only for iP-40SE
7. USB connector*
This connector is used for USB connections with a per-
sonal computer.
* iP-40SE only.
NOTE:
The L+R sound is issued from the monaural speaker.
The SD memory card guarantees the operation only for
our optional items (model: AV-SDSDC1GB). SD memory
card that was checked for operation by our company is ex-
plained at our website (http://www.avio.co.jp/english/prod-
ucts/mp/index.htm) The other SD memory cards are not
guaranteed to operate.
For how to use the SD memory card, refer to the SD Mem-
ory Card Instruction Manual.
Setting and removing the SD memory card
Setting the SD memory card
1. Set the title of the SD memory
card upwards and insert the
SD memory card straightfor-
wardly into the depth of the
insertion slot until a “click”
sound is issued.
Note that forcibly inserting the
SD memory card in a wrong
direction may cause the prod-
uct or the SD memory card to
fail or be damaged.
(After the SD icon is dis-
played on the screen, make
operation.)
Removing the SD memory card
1. Pressing the SD memory card
until a “click” sound is issued
makes the SD memory card
come out slightly.
2. Slowly pull out the SD memo-
ry card straightforwardly.
NOTE:
After changing over to the OHP input, insert or remove the
SD memory card.
TEST RGB V L R USB AUDIO MEMORY
TES
T
RG
B
S
V
L
R
AUD
IO
USB
電源
コー
ドは
必ず
アー
ス
接続
をし
てく
ださ
い。
AC
IN
電源
コー
ドは
必ず
アー
ス
接続
をし
てく
ださ
い。
AC I
N
TES
T
RG
B
V
L
R
USB
AUD
IO
MEM
ORY
TES
T
RG
B
S
V
L
R
AUD
IO
USB
電源
コー
ドは
必ず
アー
ス
接続
をし
てく
ださ
い。
AC
IN
電源
コー
ドは
必ず
アー
ス
接続
をし
てく
ださ
い。
AC I
N
TES
T
RG
B
V
L
R
USB
AUD
IO
MEM
ORY
1 2
3 4
5 6 7