Back View
1.
Out-of-Band Management (OOBM) connector
Accepts an OOBM RJ-45 connection.
2.
Serial connector
Accepts connections to serial devices.
3.
Video connector
Accepts a VGA monitor connection.Accepts a VGA monitor connection. Usable for interacting with
the BIOS/iDRAC firmware only while the appliance is powering on.
4.
USB connectors
Accepts USB connections to external devices.Accepts USB connections to external devices.
Enabled only while the appliance is powering on, before they are disabled by the OS.
5.
Four (4) RJ-45 1 Gbps Ethernet ports
Accepts Ethernet connections to multiple networks. Any port can be used.
6.
Power supply
One (VMA-AIA2-CG1) and or two (VMA-AIA2-CG2) non-redundant power supplies.
System Recommendations
Uninterruptible Power Supply
Use an uninterruptible power supply (UPS) system to protect your video surveillance system hardware. A
UPS system is used to protect critical equipment from mains supply problems, including spikes, voltage
dips, fluctuations and complete power failures using a dedicated battery. It can also be used to power
equipment during the time it takes for a standby generator to be started and synchronized.
Camera Frame Rate
The AI Appliance is meant to provide analytics for non-analytics cameras. For optimal analytics
performance, the source camera should stream a minimum of 10 frames per second (fps).
Web Browser
Basic administration settings for the AI Appliance are managed through its Server Management page, which
can be accessed from the ACC Client application or a web browser on a network workstation connected to
Back View
3
