Networking
When locating where to install the AI NVR in a multi-server deployment, consider the following items:
l
Before connecting the AI NVR, install the latest ACC Client software on the ACC Client PC.
l
At initial setup time, the ACC Client PC must have network access to the AI NVR. After a multi-server
site is created, the ACC Client PCs require network access to at least one site member. For more
information, see
Download and Install the Latest ACC Client Software
l
The AI NVR only requires a single network connection to achieve its maximum recording throughput,
but up to four network connections are available to accommodate advanced site networking
deployments.
l
The only requires a single network connection to achieve its maximum throughput, but up to four
network connections are available to accommodate advanced site networking deployments.
l
Install the AI NVR so that it can communicate over the network with all the ACC Site member servers.
l
Do not connect cameras to the AI NVR until after the appropriate network configuration has been set up.
Passwords
The first time you start the AI NVR you must create new administrator passwords for both:
l
The ACC Site running on the AI NVR.
l
The Server Management page running on the AI NVR .
Without these passwords the AI NVR can only be brought back into service by resetting it to its default state
as it was when first delivered — all recorded data, updates made to the ACC Server software, and all
configuration settings are lost and cannot be restored.
Certificate Management
By default, the AI NVR is configured with a self-signed certificate, which generates a connection warning in
the web browser. Organizations that deploy their own PKI can use the Certificates pane of the Server
Management page to manage certificates on the device. For more information, see
Networking
7
